acoustic system
英 [əˈkuːstɪk ˈsɪstəm]
美 [əˈkuːstɪk ˈsɪstəm]
网络 声纳控制系统; 声系统
双语例句
- a beautiful silver-toned voice ideal for Mozart.
最适于演绎莫扎特乐曲的银铃般美妙的嗓音 - In acoustic signal processing, it is valuable to determine whether a real mom acoustic system is nonlinear deterministic.
实际房间声学系统是否具有非线性确定性是声学信号处理中值得研究的问题。 - Measurement of ultrasonic electric signals of acoustic system during ultrasonic plastic welding;
从实验的角度研究分析超声波塑料焊机声学系统频率特性。 - There has been a substantial interest in digital processing of acoustic system in the last two decades.
在过去的二十年里人们对音响系统的数字处理有着相当的兴趣。 - By analyzing the operation, maintenance and support characteristics of acoustic system, the appropriate reliability, maintenance, testing and support parameters were selected and the reasonable and feasible index value was determined.
通过对水声系统的使用、维修和保障特点进行分析，选择适当的可靠性、维修性、测试性和保障性参数，并确定出合理可行的指标量值。 - Denoising experiment is carried out on discharge noise of single stage axial compressor by using acoustic system of micro perforation plate.
采用微穿孔板吸声结构，对某型单级轴流压缩机排气噪声进行了降噪研究。 - The study of the underwater wideband target emulator plays a very important role in improving the underwater acoustic system technology and verifying the performance of the underwater acoustic system.
研制宽频带水下目标模拟器对于开展水下对抗技术的研究和验证水下声系统的性能具有十分重要的意义。 - Logarithmic D/ A Converter and Its Practical Application in Underwater Acoustic System
对数D/A转换器及在水声系统中的应用 - The observation of acoustic system influence caused by noise on the drilling well site
钻井井场噪音对听觉系统影响的观察噪声的危害与控制 - Comparing with traditional underwater acoustic system which just utilizes pressure information, combined-sensor system processes pressure and particle velocity information jointly in sound field.
与传统的只利用声压信息的水声系统相比，组合传感器系统联合处理声场中的声压和振速信息。 - Vibration Performance and Experimental Study on Ultrasonic Lapping Acoustic System
超声研磨声学系统振动特性与试验研究 - Acoustic System and its Transducers of Ultrasonic Flowmeter
超声流量计声学系统及其传感器 - Researchers in Reference 1 found the existence of local vibration in the complex acoustic system.
在文献中，研究者曾通过大量的试验，发现了局部共振现象在复杂声学系统中的存在为研究局部共振产生的机理与条件。 - In order to obtain stable surface texture characteristics, the stability of acoustic system in the whole machining process is very important.
欲获得其稳定的表面纹理特性，声学系统在整个加工过程中的稳定性十分关键。 - Four-paths acoustic system and its transducers are presented.
还介绍了超声流量计四测线声学系统以及用于该系统的插入式传感器。 - Research on the design of ultrasonic vibration drilling acoustic system
超声振动钻削声学系统的设计研究 - Decision feedback equalization for MIMO underwater acoustic system
水声MIMO通信系统的判决反馈均衡 - Local resonance mechanism study on ultrasonic honing complicated acoustic system(ⅱ)
超声珩磨复杂声学系统的局部共振机理研究（Ⅱ） - Results show that the acoustic system of micro perforation plate can effectively reduce discharge noise.
试验表明，微穿孔板吸声结构可有效地降低排气噪声。 - The article introduced the method and procedure of acoustic system ′ s index selection and determination, including operational requirements analysis, consultation with many sources of information, parameters selection and trade-off studies concerning the major parameters of sonar system.
介绍了水声系统可靠性、维修性、测试性、保障性指标确定的基本方法和程序，包括需求分析、现状分析、指标参数选择和主要指标参数之间的权衡分析。 - There was certain sex difference in evaluation of influences from DPH on acoustic system of brainstem.
DPH对BAEPs的影响有性别差异。 - Acoustic system adopt the Ultrasonic Welder Design Expert System which is developed by Shanghai Jiaotong University.
声学系统是焊机的心脏，采用了由上海交通大学开发的超声波焊机设计专家系统。 - Experimental study on the robust H_ ∞ control for active structural acoustic system
主动结构-声系统的鲁棒H∞控制实验研究 - Finite element analysis of acoustic system for high-intensity focus ultrasonic cleaning
高能聚焦超声波清洗声学系统的有限元分析 - The active noise control ( ANC) is studied for the acoustic system.
研究有源噪声控制（ANC）问题，给出了有源噪声控制问题的一般模型。 - Investigation on the Acoustic Character of Helmholtz Resonator's Throat in the Nonlinear Condition High fidelity acoustics are not only associated with acoustic system and sound source, but also with the acoustic character of the place.
强非线性条件下Helmholtz共振器喉部声学特性研究高保真音响效果不仅与音响系统及音源有关，还与听音场所的声学特性有关。 - Function of each unit and design process is introduced in brief. ( 2) Modal simulation analysis of the stepped horn, the key component of the USM acoustic system, is carried out.
简要介绍了各单元的功能和设计过程。（2）对超声加工声学系统的关键部件&阶梯形变幅杆进行了仿真分析研究。 - In ultrasonic machining systems, acoustic system design determines the decision of quality and stability. Therefore, this paper designs two-dimensional ultrasonic acoustic without abrasive polishing system. First, study the formation of two-dimensional vibration of necessary conditions in theory.
在超声加工系统中，声学系统设计的好坏直接决定了加工的质量和稳定性，所以本文致力于二维超声无磨料抛光声学系统的研究。首先从理论上分析形成二维振动需要的条件。 - The research on air-to-water sound transmission is essential for designing underwater acoustic system to detect airborne target.
设计良好的水下对空声探测系统，需要深入理解空气声波透射入水规律。本论文对空气中声源水下声场的建模方法和水下声场分布规律进行深入研究。 - Then, the entire acoustic system was tested, including the acoustic impedance of the system, the actual head of the tool trajectory measurement and fitting, confirmed that the vibration of the tool head for the elliptical vibration locus.
然后，对整个的声学系统进行了测试，包括声学系统的阻抗特性，对工具头的实际运动轨迹进行测量和拟合，证实工具头的振动轨迹近似为椭圆振动，实践表明该系统的振动基本良好。